Assembly; Preparatory Activities; Checking The Delivery Content; Mounting The Handle For Sht150Xf - HOLZMANN MASCHINEN SHT150XF Mode D'emploi

Irrespective of all safety regulations, your common sense and appropriate technical
suitability/training are and will remain the most important safety factor for error-free operation of
the machine. Safe working primarily depends on you!
15 TRANSPORT
Damaged or insufficiently strong hoists and load slings can result in serious injury or
even death. Before use, therefore, check hoists and load slings for adequate load-
bearing capacity and perfect condition. Secure the loads carefully. Never stand under
suspended loads!
To ensure proper transport, also observe the instructions and information on the transport
packaging regarding centre of gravity, attachment points, weight, means of transport to be used
and the prescribed transport position, etc.
Transport the machine in its packaging to the installation site. To manoeuvre the machine in the
packaging, use a pallet truck or forklift truck with appropriate lifting capacity.
To transport the assembled machine, e.g. on a truck or trailer, remove the load from the table,
lower table to the lowest position, brake the castors, if necessary additionally fix machine with the
aid of blocking wedges and lash the machine with tension belts.
16

ASSEMBLY

16.1

Preparatory Activities

16.1.1 Checking the Delivery Content

Check the machine immediately after delivery for transport damage or missing or damaged parts.
Report any damage or missing parts immediately to your freight forwarder or retailer.

16.1.2 Mounting the Handle for SHT150XF

HOLZMANN MASCHINEN GmbH
WARNING
The handle (B1) is in transport position and has to be lifted and
fixed.
1. Move the handle (B1) to the vertical position.
2. Fix the handle by folding up the push rod (B2).
To fold down the transport handle, press the push rod
backwards/down.
www.holzmann-maschinen.at
TRANSPORT
SHT150XF | SHT300XF | SHT350XXF
21