Notes Concerning Usb Connection; Inserting A Disk - Sony SFD-FX200U Mode D'emploi

Operation

Notes concerning USB connection

Inserting a disk

16
About the USB cable
The USB cable connectors are shaped differently on the ends
that connect to the computer (upstream) and the USB device
(downstream).
About USB connection
• Connect the HiFD drive to the USB port on your Macintosh
or PC. Connection via a hub cannot be guaranteed.
• Do not connect the HiFD drive to the keyboard USB hub on a
Macintosh.
• Connection of multiple HiFD drives at the same time cannot
be guaranteed.
• The USB device and the computer can be switched on and off
in any sequence.
• With USB connection, you may connect and disconnect the
USB device while the computer and USB device are switched
on.
Insert a HiFD/Floppy disk into the drive.
Before a floppy disk may be used, it must be formatted.
Commercially available pre-formatted 200 MB* HiFD or 1.44
MB/720 kB DOS disks and 1.4 MB Macintosh format disks do
not need to be reformatted.
See Usable Floppy Disks on page 18 for compatibility details.
* 200 MB capacity, where 1 MB = 1 million bytes.
HiFD/Floppy disk