Preparation For Use; Operation; Temperature Adjustment - Create Fridge Studio Combi 231 Manuel D'utilisation

• Once the refrigerator is installed and cleaned, do not turn it on immediately. Be sure to plug it into
power after sitting upright for more than 24 hours to ensure proper operation.
• Check the parts and accessories inside the refrigerator and clean the interior with a soft cloth.
• Insert the plug into the power outlet to start the compressor. After 1 hour, open the freezer door.
If the temperature in the freezer compartment drops considerably, it means the cooling system
is working properly.
• After a period of operation of the refrigerator, the internal temperature will be automatically con-
trolled according to the user's settings. Once the refrigerator has cooled completely, put the food
inside. It usually takes 2 to 3 hours for it to cool completely. In summer, with high temperatures,
food takes more than 4 hours to cool completely. Open the refrigerator door as little as possible
before the internal temperature drops.
• If the refrigerator is installed in a humid area, be sure to check whether the ground wire and
leakage breaker are normal. If vibration noises occur due to the refrigerator touching the wall,
or if the wall becomes black due to air convection around the compressor, move the refrigerator
away from the wall.
• Installing the refrigerator may cause interference or picture disturbance on surrounding mobile
phones, landlines, radios, or televisions, so in such cases, try to keep the refrigerator as far away
as possible.
• When the cooling system is first turned on, the display icons will illuminate for 2 seconds.
T E MP E R ATUR E ADJU ST ME NT
Refrigerator temperature setting:
• The temperature is adjusted by pressing the "SET" key. Each time you press the "SET" key, the
current mode indicator will turn off while the next mode indicator will turn on.
• The setting is validated if no key is pressed within 5 seconds (otherwise the mode setting will be
invalid).
• The cycle of temperature modes is: "5ºC / 4ºC / 3ºC / 2ºC / 1ºC / FAST COOL / 5ºC".

PREPARATION FOR USE

OPERATION

Adjusting the freezer temperature:
• The freezer temperature is controlled by the temperature control
regulator.
• When the temperature mode remains unchanged, turn the tem-
perature control knob clockwise, the refrigerator temperature
will decrease while the freezer temperature will increase.
E NG LI SH 11