Create Studio Pro Manuel D'utilisation page 9

Hot foam.
• In the standby mode, press the key
"BIP" will sound. All four function indicator lights will be on.
• Press the button
indicator light for the hot foam function will come on
functional indicators go out.
• After the work is completed, the device will sound "BIP" and the indicator
light it will power off and stop working to return to standby status.
• Note. The whole working time is automatically adjusted according to the
added milk capacity and original milk temperature. When the work is com-
pleted, the milk will have foamed and the temperature will be approximately
60ºC (±5°C).
Milk heating.
• In standby mode, press the key
will sound. All four function indicator lights will be on.
• Then press the button
flashes for 2 seconds.
• Then the indicator light for the hot foam function will come on
other three operating indicator lights will turn off.
• After completing the work, the device will sound "BIP" and the indicator light
it will power off and stop working to return to standby status.
• Note. The whole working time is automatically adjusted according to the
added milk capacity and original milk temperature. When the work is com-
pleted, the milk will have warmed up and the temperature will be approxi-
mately 60ºC (±5°C).
Cold foam.
• In standby mode, press the key
will sound. All four function indicator lights will be on.
• Then press the button
the frother will start working after the indicator light flashes for 2 seconds.
• Then the indicator light for the frothing function will come on at cold foam
and the other three operating indicator lights go out.
• After completing the work, the device will sound "BIP" and the indicator light
it will power off and stop working to return to standby status.
• Note. All the working time is automatically adjusted according to the added
milk capacity and the original temperature of the added milk. When the work
is completed, the milk will have foamed and the temperature will be the nat-
ural temperature of the milk used.
MODE SELECTION
and the indicator light will flash for 2 seconds. Then the
gently once and the warning tone "BIP"
and the mode will work after the indicator light
gently once and the warning tone "BIP"
of the normal temperature frothing function and
gently once and the warning tone
and the other three
and the
E N G L ISH
9