Dell PowerEdge 2500 Guide D’activation page 6

1-4 Ac ti v at in g t he I nt e g ra t ed RAI D C o n t ro l l e r
Downloaded from www.Manualslib.com
Connect the battery cable to the RAID battery connector on the system board
b
(see the system information label on the inside of the system cover for the
location of this connector).
Install the peripheral bay.
c
See "Installing the Peripheral Bay" in the system Installation and Troubleshooting
Guide.
Replace the cooling shroud and system cover.
10
Reconnect the system and peripherals to their power sources and turn them on.
11
Install the RAID software.
12
For more information, see the RAID controller software documentation provided in
this upgrade kit.
manuals search engine