Preconfigured Temperature Setting - Conrad BASETech 1517164 Mode D'emploi

To make the setting, go to the function settings as described under Holiday mode. Use the buttons
" " and " " to select "Ht" for the heating or "CL" for the cooling system. Press "OK" to confirm.
Press and hold the "SET" button for 3 seconds to activate the delay time. Use "Select" to change
from the time setting "ti" to the function setting "St" and confirm with "Set". Use "Select" to toggle
between holiday "Ho" and heat/cool "Ht" and confirm with "Set". Use "Select" to toggle between
heating "Ht" and cooling "Cl" and confirm with "Set". Use "Select" to toggle between delay (d:ON)
and delay (d:oF). Save and close your settings with "OK".
c) Preconfigured temperature setting
By means of this setting you can pre-configure the following four temperature functions: Comfort,
Semi-Comfort, Economic and Anti-Frozen.
1 Press and hold the "TEMP" button for 3 seconds to enter the menu. Briefly press the "TEMP"
button to be able to toggle between the preconfigured settings.
2 With the buttons " " and " " you can decrease or increase the temperature in steps of 0.5 °C
depending on the setting.
3 Press the "TEMP" button to confirm your setting. Now you can set the next function.
4 Confirm with "OK" and exit the menu.
32
Comfort
Economic
Semi-Comfort
Anti-Frozen