AEG KK 30 Instructions D’utilisation page 35

CLEANING, CARE
AND MAINTE-
NANCE
Minimal care will ensure your device
remains functional for years.
•
Switch off the device and discon-
nect from power before cleaning or
inspecting the device.
•
Carefully wind the cable when storing
the device. This will help prevent
accidental damage to the cable and
the device.
•
Do not use abrasive or aggressive
cleaning agents.
•
Wipe the lid and the container with
a damp cloth; use a little washing-up
liquid if necessary. Allow all parts to
dry thoroughly.
•
Clean the product with a soft, dry
cloth.
•
Store the machine in a clean, dry
place.
•
Leave the lid open during storage to
prevent mould.
Defrosting the cool box
Ice may build up inside the device over
time and reduce the cooling capacity.
Defrost the device regularly.
Caution:
Do not use hard, sharp or pointy ob-
jects to remove ice or frozen on items.
1. Switch the device off.
2. Disconnect the device from power.
3. Remove all contents and if neces-
sary store these in a different
cooling unit.
4. Leave the lid open.
5. Use a clean cloth to wipe up water.
6. Once all the ice has melted, clean
the inside of the device.
7. Allow the device to dry completely.
Changing the fuses
A fuse inside the car plug safeguards
the device. This will respond in the
event of a short circuit or voltage peaks
and must then be replaced.
Attention!
Do not use higher rated fuses. The elec-
tronics may otherwise be damaged.
3
2
1
1. Unscrew the retaining pin (1) with
the fuse cover (2) from the car plug
(4).
2. Insert a new micro-fuse (3) of the
same rating (see Technical Data).
3. Replace the retaining pin (1) with
the fuse cover (2) in the car plug (4).
English 35
4