Resetting To Default Settings - wtw Oxi 330i Mode D'emploi

Oxi 330i/340i
Measurement
parameters
Configuration
parameters
O
I n I
n o

Resetting to default settings

You can reset the measurement parameters and the configuration to the de-
livery status separately from one another (initialization).
The following measurement parameters can be reset to the delivery status:
Oxygen (O InI)
2
Measuring mode
AutoRange automatic switchover of
the measurement range
Relative slope
Correction factor of the relative
slope
Salinity input
Salinity correction
The following configuration parameters (InI) can be reset to the delivery sta-
tus:
Baud rate
Interval 1
(automatically saved)
Interval 2
(for data transmission, only
Oxi 340i)
Procedure of the reset:
l To switch it off, press <CAL> while pressing the <RUN/ENTER> key.
l To reset the measurement parameters with < > < >, select YES and
confirm with <RUN/ENTER>, or
l Continue to the configuration parameters without resetting (InI) with the
<RUN/ENTER> key.
l After the configuration parameters, InI changes the instrument to the last
active measurement mode.
Resetting to default settings
D. O. concentration
On (YES)
1.00
1.000
0.0
off
4800
OFF
OFF
11