Cleaning Metal Grease Filters; Replacing Activated Charcoal Filter; Lighting Unit - Bertazzoni Kin30Xt Instructions D'installation Et D'utilisation

Cleaning metal grease filters

The metal grease filters can be cleaned in hot detergent
solution or washed in the dishwasher. They should be
cleaned every 2 months, or more frequently if use is
particularly heavy.
• Remove the filter, pushing the lever towards the back
of the unit and at the same time pulling downward.
• Wash the filter without bending it, leave it to dry
thoroughly before replacing (if the surface of the filter
changes color over time, this will have absolutely no
effect on its efficiency).
• Replace, taking care to ensure that the handle faces
forward.
• Cleaning in dishwasher may dull the finish of the metal
grease filter.
• No water can be present in filters before installing
back in hood.

Replacing Activated Charcoal Filter

The Activated Charcoal Filters are not washable
and cannot be regenerated, and should be replaced
approximately every 4 months of operation, or more
frequently with heavy usage.
• Remove the charcoal filter by rotating it clockwise
(backwards) until it unlocks from the motor housing
and pull off sideways.
• To re-insert each charcoal filter, place up against the
side of the blower and push it inward. Then turn the
charcoal filter clockwise (forward) until it fits into place.
Caution: "When used in recirculation mode, to Reduce
the Risk of Fire and Shock use only conversion kit Model
Charcoal Filter kit sku #901531; Durable charcoal filter
kit sku #901532"
Please contact the retailer that sold you the product to
purchase carbon filters above.

Lighting unit

• Replace the lamp with a new one of the same type,
making sure that you insert the two pins properly into
the housings on the lamp holder.
16
Gu10 self-ballasted led lamps
– listed in accordance with ul
1993/nmx-j-578/1-ance/csa
c22.2 No. 1993