Bertazzoni KIN30XT Instructions D'installation Et D'utilisation page 12

5
ELECTRICAL INSTALLATION
WITH CONNECTION CABLE
GROUNDING INSTRUCTIONS This appliance must
be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing
an escape wire for the electric current. This appliance
is equipped with a cord having a grounding wire with
a grounding plug. The plug must be plugged into an
outlet that is properly installed and grounded.
WARNING - Improper grounding can result in a risk
of electric shock.
Consult a qualified electrician if the grounding instruc-
tions are not completely understood, or if doubt exists
as to whether the appliance is properly grounded.
Do not use an extension cord. If the power supply cord
is too short, have a qualified electrician install an outlet
near the appliance.
WARNING - "The supply cord shall be accessible for inspection after installation".
6
For Non-Ducted Recirculation
Attach each
charcoal
filter to the
black grid on
each side of
the blower.
Press the
charcoal
filter tightly
to the black
grid on the
blower side
and rotate
the filter
clockwise (towards the front of the insert hood)
until it locks into place. Turn counterclockwise
(towards the back of the insert hood) to remove.
Required Charcoal Filter kit sku
#901531 (purchased separately).
Durable charcoal filter kit
sku #901532 (purchased separately).
12
Option
1
2
7
12a
9
7
Before putting the filters, tighten the 2 knobs (7)
with 2 screws (12a). Use two hands to insert and
remove the filters.
Max. 33 "
7/16
12a
7