Installation Instructions - Ge Profile Pcdbi01Kitfs Instructions D'installation

Masquer les pouces

Table des Matières

Les langues disponibles

WARNING

For your safety, the information in this manual must be followed to minimize

the risk of fire, explosion, electric shock, and to prevent property damage, personal injury,

or death.

WARNING

■ Plug into a grounded 3-prong outlet.

■ DO NOT remove ground prong.

Failure to follow these instructions can result in death, fire or electrical shock.

ELECTRICAL REQUIREMENTS

CIRCUIT – Individual, properly polarized and grounded 15 or 20 amp circuit breaker or time-delay fuse.

POWER SUPPLY – 2 wire plus ground, 120 Volt, single phase, 60 Hz, alternating current.

Outlet Receptacle – Properly grounded 3-prong receptacle to be located so the power

cord is accessible when the dishwasher is in position. If a 2-prong receptacle is present, it

is the owner's responsibility to have a licensed electrician replace it with a properly grounded

3-prong grounding type receptacle.

Unit must be electrically grounded in accordance with local codes and ordinances, or in the

absence of local codes, with latest edition of the NATIONAL ELECTRICAL CODE, ANSI/NFPA

NO. 70 or CANADIAN ELECTRICAL CODE, CSA C22.1. Check with a licensed electrician if you are not sure that the

dishwasher is properly grounded.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric

shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an

equipment- grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is

properly installed and grounded in accordance with all local codes and ordinances.

Improper connection of the equipment-grounding conductor can result in a risk of electrical shock.

WARNING

Check with a qualified electrician, or service representative or personnel, if you are in doubt as to

whether the appliance is properly grounded. DO NOT modify the plug on the power supply cord. If it will not fit the outlet,

have a proper outlet installed by a qualified electrician.

PRODUCT DIMENSIONS

26-1/2"

2-5/8"

17-1/8"

1-3/4"

2-3/8"

21-3/4"