Parkside Performance PAESP 20-Li A2 Mode D'emploi page 37

3. Locking: Rotate the dust box
clockwise direction until
to .
Removing the dust box
1. Rotate the dust box
clockwise direction until
to .
2. Remove the dust box
adapter for dust box
External dust extraction
1. Remove the adapter for dust box
from the extraction outlet
2. Place the o-ring in the groove of the
extraction outlet
3. Connect the end of the hose coupler
to the extraction outlet
˜ Fitting/changing the sand
grid
(Fig. D)
WARNING! Risk of injury!
m
Always switch the product off,
remove the battery pack
and let the product cool
down before making any
adjustments.
1. Align the shape of the sand grid
to the sanding attachment on the
product.
2. Use the hook-and-loop fabric to
attach the sand grid
product.
˜ Operation
˜ Switching on/off
CAUTION! Risk of injury!
m
Always wear protective gloves
when handling or working with
the product.
34 GB/IE
in
[ 2 ]
points
[ ]
in anti-
2 ] [
points
[ ]
from the
2 ] [
.
[ 1 ]
1 ] [
.
[ ]
.
[ ]
.
[ ]
[ 6 ]
[ ]
to the
[ ]
CAUTION! Risk of injury!
m
Before switching on the product:
u
Ensure the sand grid
contact with the workpiece.
Ensure your stance is stable.
u
Always hold the product firmly with
both hands while working.
Keep your hands away from the
u
sand grid when the product is in
[ ]
operation.
NOTE
The required orbital stroke rate is
u
dependent on the material and
the work conditions and can be
determined using practical tests.
Preselecting the vibration rate
Selecting the desired speed: Press
o
the speed control button
several times.
Vibration level Vibration rate (min
1 12,000
2 12,800
3 14,000
4 16,000
5 18,000
6 20,000
Switching on
Press the on/off switch
o
Switching off
Press the on/off switch
o
˜ Working instructions
CAUTION! Risk of injury and
m
damage to property!
Secure the workpiece with the
u
aid of clamping devices on the
workbench.
is not in
[ ]
once or
7 ] [
)
–1
.
3 ] [
again.
3 ] [