Parkside Performance PAESP 20-Li A2 Mode D'emploi page 33

f) Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed.
Use of the power tool for operations
different from those intended could
result in a hazardous situation.
h) Keep handles and grasping
surfaces dry, clean and free from
oil and grease. Slippery handles and
grasping surfaces do not allow for
safe handling and control of the tool
in unexpected situations.
Battery tool use and care
a) Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type
of battery pack may create a risk of
fire when used with another battery
pack.
b) Use power tools only with
specifically designated battery
packs. Use of any other battery
packs may create a risk of injury and
fire.
c) When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
metal objects, that can make a
connection from one terminal
to another. Shorting the battery
terminals together may cause burns
or a fire.
d) Under abusive conditions,
liquid may be ejected from the
battery; avoid contact. If contact
accidentally occurs, flush with
water. If liquid contacts eyes,
30 GB/IE
additionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns.
e) Do not use a battery pack for
tool that is damaged or modified.
Damaged or modified batteries
exhibit unpredictable behaviour
resulting in fire, explosion or risk of
injury.
f) Do not expose a battery pack
or tool to fire or excessive
temperature. Exposure to fire or
temperature above +130 °C may
cause explosion.
g) Follow all charging instructions
and do not charge the battery
pack or tool outside the
temperature range specified in the
instructions. Charging improperly or
at temperatures outside the specified
range may damage the battery and
increase the risk of the fire.
CAUTION! RISK OF
EXPLOSION! Never charge
non-rechargeable batteries!
Protect the rechargeable
battery from heat, for
max. 50°C
example from continuous
exposure to sunlight, fire,
water and moisture. There is
a risk of explosion.
Service
a) Have your power tool serviced
by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
b) Never service damaged battery
packs. Service of battery packs
should be only be performed by the
manufactured or authorized service
providers.