Manually Setting The Date/Time; Temperature Display; Activating/Deactivating The Alarm - Hama RC 660 Mode D'emploi

Note – Summer time
The clock automatically switches to
summer time.
display as long as summer time is
activated.

5.2. Manually setting the date/time

Time
• Move the LOCK slide switch (12) to
the TIME SET position to manually set
the time (1).
• Set the hour by pressing the HOUR/
MONTH button (9).
• Set the minute by pressing the MIN/DATE
button (10).
• Move the LOCK slide switch (12) to the
LOCK position to save your settings and
return to normal mode.
Date
• Move the LOCK slide switch (12) to the
DATE SET position to manually set the
date (3/4).
• Set the year by pressing the 12/24/YEAR
button (8).
• Set the month by pressing the HOUR/
MONTH button (9).
• Set the day by pressing the MIN/DATE
button (10).
• Move the LOCK slide switch (12) to the
LOCK position to save your settings and
return to normal mode.
Selecting 12 or 24-hour format
• Press the 12/24/ YEAR button (8) to
switch between the 12 and 24-hour
formats (1/2).
appears on the

5.3. Temperature display

• Press the MIN/ DATE button (10) to
choose between °C and °F for the
temperature display (6).
5.4. Alarm
Setting the alarm time
• Move the LOCK slide switch (12) to the
ALARM SET position to manually set the
alarm time (2).
• Repeatedly press the 12/24/YEAR
button (8) to set the time of alarm 1 (2)
or alarm 2 (2).
• Either the symbol or the
displayed accordingly.
• Set the hour by pressing the HOUR/
MONTH button (9).
• Set the minute by pressing the MIN/DATE
button (10).
• If necessary, press the 12/24/YEAR button
(8) again to set the other alarm.
• Move the LOCK slide switch (12) to the
LOCK position to save your settings and
return to normal mode.
• Repeatedly press the HOUR/MONTH
button (9) to display the set time of alarm
1 (2) or alarm 2 (2).
• The corresponding symbol (
displayed for about 10 seconds.
• By default, in normal mode (LOCK) the
time for alarm 1 (2) is displayed.

Activating/deactivating the alarm

• Press the HOUR/MONTH button (9)
once or repeatedly and hold it for about
3 seconds to enable or disable one of
the alarms.
• If an alarm is activated, the corresponding
symbol ( or
symbol is
or ) is
) is displayed.
5