Daily Inspection - Royal Catering Rc-Glrg400 Manuel D'utilisation

6.1 Ignition and Flameout
1. Push the knob and rotate it counterclockwise.
2. Press the red ignition button until you hear a 'click,' then release it and check if the
flame has ignited through the observation hole. If not, continue pressing until the flame
ignites.
3. After the burner ignites, keep pressing the knob for 7 to 10 seconds, then release it.
4. If the flame extinguishes within one minute, turn the knob to the
wait 3 to 5 minutes, and repeat the ignition process.
5. To adjust the flame, rotate the knob counterclockwise up to 90°. This is maximum heat.
Beyond this point, the flame will gradually decrease.
6. After use, rotate the furnace switch clockwise and close the regulating valve on the gas
cylinder.

7. Daily Inspection

Daily inspections are crucial for preventing serious accidents. If you detect the smell of gas or
suspect a malfunction, stop using the equipment immediately. Inspect the equipment before
and after use every day.
Before Use:
• Is the machine tilted?
• Is the control panel damaged?
During Use:
• Is there an unusual smell or odor?
• Are there any vibrations?
• Is the burner flame normal?
• Is the thermal power normal?
8. Cleanliness and Maintenance
•
Clean the grate before use by removing the oblique grate, brushing off limescale with a
nylon brush, cleaning with a neutral detergent and water, and wiping with a cloth.
•
Do not spray the furnace body with water directly and avoid using corrosive substances
for cleaning.
•
Do not modify the ventilation settings necessary for combustion.
•
Cut off the gas source if the device is not in use.
•
If storing the device for a long period, clean the surface with a cloth dipped in food
grade oil / vaseline / lubricant (or any other thing for anti-rust purposes), and store in a
well-ventilated area.
•
Conduct comprehensive inspections at least once a year with the help of
professionals.
•
Avoid touching the heating plate by hand when the machine is in use to prevent
burns.
•
Close the gas supply valve when the machine is not in use to avoid accidents.
•
If the machine malfunctions, do not attempt to repair it yourself. Contact the
company's maintenance department or a dealer.
EN
"●"
position, then