Filling The Rinse Aid Dispenser; Filling The Detergent Dispenser - Comfee Cs14Efsbk1Rcm Manuel D'entretien Et D'utilisation

Filling the rinse aid dispenser

Rinse aid greatly improves drying and reduces water
spots and filming.
Rinse agent removes spots and
prevents new film build up on your dishes, glasses,
flatware, cookware and plastic.
your dishes and dishwasher interior will have
excessive moisture. The Heated Dry option will not
perform as well without rinse aid. The rinse aid
dispenser, located next to the
releases a measured amount of
automatically
rinse aid during the last rinse.
If spotting and poor drying is a problem, increase the
amount of rinse aid dispensed by
higher number. The dial is located under the dispenser
cap.
If the rinse aid is low, the Rinse Aid light is illuminated at
the beginning and end of the cycle indicating that it
is time to refill.
Your dishwasher is designed to use liquid
rinse aid. The use of rinse greatly improves
drying performance after the final rinse. Do
not use a solid or bar-type rinse aid. Under normal
conditions, the rinse aid will last approximately
one month, try to keep it full, but do not over fill.
Filling the Dispenser
Try to keep it full, but do not over fill.
1
2 Turn the dispenser cap to the left and lift it out.
3
Add rinse agent until the indicator window looks full.
4
Clean up any spilled rinse agent with a damp cloth.
5
Replace the dispenser cap.
Less
Dispenser Cap
Without rinse aid
Detergent cup,
rotating the dial to a
More
&

Filling the detergent dispenser

1. Push the dispenser cover latch downwards and
open it .
Open
cup
2. Add the detergent to the main wash compartment.
3. After pouring the detergent into the container,
close the lid, first pushing (1) and then
pressing on it (2) until hear the click.
11