Package Contents; System Requirements - i-tec C31METALG3HUB Mode D'emploi

EN Quick Start / USB-C HUB 3 Port + Gigabit Ethernet Adapter
INTRODUCTION
The HUB offers three USB 3.0 ports. The Gigabit Ethernet port allows
user's computer instantly connect to a 10/100/1000 Mbps network.
SPECIFICATION
• 1x USB 3.1 (Gen. 1) type C connector to connect HUB to laptop /
tablet / PC
• 3x USB-A 3.0 port for connecting USB equipment, backward
compatible with USB 2.0
• 1x Ethernet 10/100/1000Mb/s LAN RJ-45 port with function MDI/
MDIX and self-correction
• Realtek 0411 Chipset – USB 3.0 HUB
• Realtek 8153 Chipset – USB 3.0 to Gigabit Ethernet – supports
standard IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3az
(Energy Efficient Ethernet)
• LED indication for Ethernet connection
• Supports Wake-on-LAN
• Operation temperature: 0-40°C
• Storage temperature: -10 to +80°C
• Humidity: up to 85%
• Dimensions: 96 x 30 x 21 mm
• Weight: 63 g

PACKAGE CONTENTS

• i-tec USB-C HUB 3 Port + Gigabit Ethernet Adapter with
integrated cable (28 cm)
• Quick Installation Guide

SYSTEM REQUIREMENTS

Hardware requirements: laptop / tablet / PC with free USB-C port
Operation System: Windows 7 / 8 / 8.1 / 10 32/64 bit, macOS X, Linux,
Android
Note:
Prior to installing the USB-C, make sure that there are (for the USB-C
3.1 controller in the laptop / PC) installed the latest drivers for it. In
case of outdated USB-C drivers problems during installation or use
may occur.
8