Create Studio Crystal Mist Mode D'emploi page 7

ner. In case of damage, contact after-sales service. A damaged cord or plug
must only be replaced by the manufacturer or a qualified person to avoid injury.
• Do not let the cord hang over the edge of a table or counter. Do not operate the
appliance near hot surfaces, avoid proximity to open fires and all types of heat
and ignition sources.
• Do not plug in or operate the appliance with wet hands.
• Plug the appliance into a grounded outlet and make sure it is securely connected.
• Never connect this appliance to an external timer to avoid dangerous situations.
• When using this appliance, make sure there is enough space above and on all
sides for air circulation (10 cm). Do not operate the appliance if it is in contact
with or near curtains, clothing, towels or other flammable materials.
• While the appliance is in operation, hot steam is released through the air outlet
openings. Keep hands and face at a safe distance from steam and air outlet
openings. Also be careful of steam and hot air when removing the tray from the
appliance.
• Accessible surfaces may become hot during use.
• If you see dark smoke coming from the appliance, unplug it immediately and
wait for it to stop before removing the tray.
• The tray becomes hot when used in the air fryer. Wear gloves whenever you
touch it.
• Place the air fryer on a firm, flat, level, heat-resistant surface. Do not place it
on a soft surface such as a carpet. Avoid placing it in a place where it may tip
over during operation.
• There are no user-serviceable parts inside. Do not attempt to disassemble or
repair this product. Contact our after-sales service.
• Allow the appliance to cool for about 30 minutes before moving or cleaning it.
• Make sure the ingredients come out golden yellow instead of dark or brown.
Remove any burnt food.
E NGLI SH
7