Fastener Specifications; Technical Specifications; Noise/Vibration Information - Senco Fusion F-Lxp Mode D'emploi

Fastener Specifications

EN
F-LXP
6.4
10 - 38
18g

Technical Specifications

Voltage
Weight with Battery
Height
Length
Width
Recharge Time
Fastener Capacity
Fastener Range
Collation Angle

Noise/Vibration Information

Measured per EN60745-1: 2009 + A11: 2020 and EN60745-2-16: 2010
Sound power level (uncertainty K=3dBa) Lw
Sound pressure level (uncertainty K=3dBa) Lp
Total vibration level (emission ah)
Total vibration level (uncertainty K)
Notes: The declared vibration total has been measured in accordance with a standard test method and may be used for comparing one tool with
another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning: The vibration emission during actual use of the power tool can differ from declared total value depending on the ways in which the tool is
used.
Safety measures to protect the operator should be identified that are based on an estimation of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
SENCO Fastener
Code
L06
L07
L08
L10
L11
L12
L13
L14
L15
L17
F-LXP
18 volts Li-ion
3.0 kg
31,5 cm
26,4 cm
9,5 cm
45 minutes
110
9,5 mm - 38 mm
0°
91.79 dB(A)
80.79 dB(A)
3.03 m/s2
1.5 m/s2
16
A
IN. MM
3/8 9,5
7/16 11
1/2 13
5/8 16
3/4 19
7/8 22
1 25
1-1/8 28,5
1-1/4 32
1-1/2 38