Gaggenau AF 2 Série Notice D'utilisation Et De Montage page 12

By hand:
Note: You can use a special grease solvent if soiling
is stubborn. You can order it via the online shop.
▯
Soak the metal grease filters in hot soapy
solution.
▯
Use a brush for cleaning and then rinse the
filters well.
▯
Allow the metal grease filters to drip dry.
In the dishwasher:
Note: Slight discoloration is possible when cleaning
the grease filters in the dishwasher. This does not
affect the metal grease filter's functioning.
▯
Do not clean extremely dirty metal grease filters
with dishes.
▯
Loosely position the metal grease filter in the
dishwasher. The metal grease filters must not be
jammed in.
Uninstalling metal grease filter
1 Pull out the filter pull-out and push in the push-
to-open mechanism.
2 Open the lock on the metal grease filter and pull
the metal grease filter out of the retainer at an
angle. When you do this, take hold of the metal
grease filter from underneath with your other
hand.
Notes
‒ Fat may accumulate in the bottom of the
metal grease filter.
‒ Hold the metal grease filter level to prevent
fat from dripping out.
12
3 Clean the metal grease filter.
For appliances with a glass plate in the filter pull-out:
▯
The glass plate can be removed easily and can
be cleaned in the dishwasher.
▯
To remove the glass plate, carefully lift it out.
Installing metal grease filter
1 Insert the metal grease filter at an angle.
When you do this, take hold of the metal grease
filter from underneath with your other hand.
2 Lift the metal grease filter up and lock it in
place.
3 Push and open the push-to-open mechanism
again.
Note: The push-to-open mechanism must be
pressed in order to guarantee that the drawer is
working correctly.