HOMCOM TST10-RD Mode D'emploi page 4

HANDLING THE APPLIANCE
POWER
• Press the button of ON/OFF (7), to select power on / off the appliance.
SPEED
• Press the button of ON/OFF (7) , to power on the appliance.
• Press the button of Speed (4), to select the fan speed.
• 3 speed for select: (Low - Mid - High)
MODE
• Press the button of ON/OFF (7), to power on the appliance.
• Press the button of MODE (5), to select the fan mode.
• 3 mode for select: (NORMAL / NATURE / SLEEP).
• The default mode is NORMAL, and the SLEEP/NATURE mode with the indicator
be light up.
TIMER (0.5 - 7.5 HOURS)
• Press the button of ON/OFF (7), to power on the appliance.
• Press the button of TIMER (3) to the desired time period (0.5-7.5 Hours)
• It will now remain in operation until the selected period of time runs out.
• After the timer runs over, the device will turn off.
OSCILLATION
• Press the button of ON/OFF (7), to power on the appliance.
Press the button of OSCILLATION (6), appliance will swing from Left to Right.
REMOTE CONTROL
• All the function above can be setting by remote control
CLEANING AND MAINTENANCE
Before cleaning the appliance always disconnect the power plug from the
receptacle.
• The appliance, the power cord and the power plug should not be immersed in
water or other liquids when you are cleaning them. Clean them with a dry cloth.
• If it is very dirty, the outside of the appliance can be wiped carefully with a moist
cloth and then dried carefully. Make sure that no moisture penetrates into the
interior of the appliance.
• Do not use any harsh cleaners, steel brushes, scouring powder or other hard
objects to clean the appliance as these can cause scratches on the surfaces.
• Clean the appliance regularly.
• Never use solvents, benzene or oil-based cleaners as these can damage the
housing.
• Re-tighten visible screw connections on the appliance regularly in order to
ensure that the device is functioning properly.
3