VEVOR KD-B1031 Mode D'emploi page 14

10. After confirming the push seal ring, the seal
ring is inside the polishing barrel.
11. Put back the stainless steel cover on top of
the inner lid and reattach the knob and tighten it.
Make sure to tighten the best as you can to
ensure the barrel does not leak any water.
12. Place the tumbler barrel onto the tumbler
base, with the lid facing to the right.
13. Plug in the machine, press the On/Off button
and select the appropriate number of days and
speed (refer to the Tumbling Cycles Guide on
page 4), and let the machine do its job!
14. You can always pause the machine without
losing the speed and timer settings by pressing
the Pause/Resume button. Press it again to
resume.
- 13 -