LawnMaster CLGVB4816 Manuel De L'opérateur page 13

ASSEMBLY
WARNING
Never operate the tool without the proper safety devices in place and working. Never operate the tool
with damaged safety devices. Failure to heed this warning can result in serious personal injury.
ASSEMBLING THE HANDLE (See Figs. 1-5)
■ Insert the two lower handles into the deck and secure them with two screws (Fig. 1 & 2).
■ Place the cord retainer on middle handle. Secure the middle handle to the lower handle with two
carriage bolts and two wing nuts (Fig. 3).
■ Secure the upper handle to the middle handles, at the desired height, with two carriage bolts and
two wing nuts (Fig. 4). There are two possible positions.
■ Use the two cable clips to attach the control cable to the handles (Fig. 5).
During assembly, ensure that the control cable is not squeezed and that it has sufficient play.
Fig. 1
Lower Handle
Fig. 4
Fig. 2
Screw
Fig. 5
Cable
Clips
13
Fig. 3
Carriage
Bolt
Wing Nut
EN