Air Compressor - Pro-Point 8306078 Manuel D'utilisateur

8306078
10. To reducevibrations,maintainthe tool as explainedin this manual.If abnormalvibrations
occur,stopusingthistool immediately.
SPECIFIC SAFETY
Do not over-tighten nuts.Theycould shatterand causedamageto the tool or workpiece
or causeseriousinjury. Usea torquewrenchto torque the nut after usingthe
impact wrench.
Do not useany additionalforce uponthe wrench in order to removea nut.
2.
Do not allow wrenchto runwithoutload for an extendedperiod of timeas thiswill
3.
shorten its life.
Thisimpactwrench shouldonly be usedwith impactsocketsand extensions. U seof other
4.
accessories can causethemto break,which could damage the unitor causeinjury.
TOOL USE AND
Usethe correcttool for the job. Do not forcea tool or attachment t o do the work of a
larger industrialtool. Maximize tool performanceand safetyby usingthe tool for its
intended task.
2. Thistool was designedfor a specificfunction. Do not modifyor alter thistool or useit for
an unintendedpurpose.
Securelyhold thistool usingboth hands.Usinga tool with only one handcan resultin
3.
loss of control.
Maintain tools with care (see Maintenance).
4.
Avoid unintentional s tarts.Be surethatthe trigger is in the neutralor OFFpositionwhen
5.
not in useand beforeconnectingit to any air source.
Do not carry the tool with fingersnear or on the trigger.
6.

AIR COMPRESSOR

Ensur e the compressor usedwith the tool can supplythe requiredCubic Feetper Minuteat the
requiredPSI(seeSpecifications).
I. Useproper sizeand typeof air pressure line and fittings.
2. Useonly clean,dry, regulatedcompressed air at the rated rangeas markedon the tool.
CAUTION! Do not usean air sourceother than an air compressorto power this tool.
Alwaysusean air regulator,an in-linefilterand a moisturetrap inyour compressed air
3.
system. T heseaccessories will increasethe tool's life and keepsthe tool in good working
condition.Seethe diagram for recommended components of an air line.
Avoid usingan air hosethat istoo long. Thelongerthe hose,the lower the pressure that
4.
reachesthe tool, possiblycausingit to ceasefunctioning.As well, a longer hosecan
becomea tripping hazard.
Visitwww.princessauto.com for moreinformation
1 in. dr Impact Wrench
PRECAUTIONS
CARE
v 2.4
5