PRO-POINT 8381493 Mode D'emploi

PRO,POINT
1/2 in. dr Digital
Torque Wrench
Drive Size
Material
Finish
Reversible
Number of Teeth
Torque Range
Accuracy
Length
Feature(s)
Battery Details
SAFETY
WARNING! Read and understand
tool. The operator must follow
of personal injury and/or damage to the equipment.
Keep this manual for safety warnings,
inspection and maintenance instructions.
Study this booklet carefully
2. Never apply more torque
When wrench is not in use, keep doing
torque setting.
3. This digital torque wrench
threaded fasteners only. Do not use it as a nut-breaker
use other than intended.
4. Always use approved eye protection
torque wrench.
5. This wrench will not prevent
than you set before use of the tool.
force once the preset torque
6. Wear gloves that provide
work materials.
7. There are no components
the wrench or making any alterations
accuracy and will void the warranty.
OPERA TION
Unlock the handle dial by pulling
end of the handle.
2. Press the power/function
torque wrench has an auto off feature
shut off after it is been idle
power condition of the battery
the display.
Press again the power/function
3.
readout. The torque wrench
ft-lb, in-lb, kg-cm and kg-m.
4. Rotate the handle dial clockwise
desired torque.
Push the locking button
5.
6. Attach the socket onto the driver
7. Turn the reverse level for
clockwise operation.
Visit www.princessauto.com for more information
1/2 in.
Chrome-molybdenum
Chrome Plating
Yes
72
29.5 to 147.5 ft-lb
(355 to 1,770 in.-lb.)
96
19-1/4 in.
Power saving 60 second
shut-off. Displays in-lb,
Nm, Kg-cm and Kg-m.
Uses CR2032 Button Battery
all instructions before using
basic precautions to reduce
precautions, operating
before operating this torque
than the maximum torque readout.
adjustment at lowest
is designed for manual tightening
when using the
you from applying more torque
Do not continue to apply
setting has been reached.
protection based on the
that can self- serviced. Disassembling
may result in the loss of
out the locking button
button to activate the display. The
that will automatically
for 60 seconds. It also indicates
in the lower left corner
button to set the torque
can be set for readout unit in N-m,
or counter clockwise
back to lock the handle dial.
anvil of the torque wrench.
clockwise or counter
1/2 in. dr Digital Torque Wrench
User Manual
8. Place the socket
torque
steel indicated
a.
b.
c.
9. Stop pulling
A Battery
B Spring
C Battery
auto
D Battery
ft-lb,
Compartment
Lock
E
F Handle
G Function/Power
this
Button
the risk
or
ACCURACY
The Torque
wrench. shipment
in the left hand direction
readings
scale increments.
of
REPLACING
or for any
Except
must be done
2. When
words
of a Battery
significant
3. Remove
Gently
4. Remove
CR2032
indicated
5. Gently
DISPOSING
on the
If your tool has become
Bring it to the appropriate
the
of
to set the
For technical questions call 1-800-665-8685
on the nut or bolt,
wrench. When the applied
by the following:
Audible click: Note: The click will be quieter
torque settings.
Touch: The handle will be felt to "break
of the set torque.
Visually: The handle will be seen to "break
point of the set torque.
the wrench.
Cover
c
D
Button
Dial
RA TING
Wrench is certified to have been calibrated
to the accuracy +/-4% in the right
on readings 20% to 100% of capacity.
below 20% of capacity, the accuracy
THE BA TTERY
for replacing the battery, all other
by a qualified service
the Battery has a low charge
LOW BATTERY will appear
will show in the readout
charge existing.
the PH#OO screw that holds the battery
remove the battery cover.
the discharged battery and replace
battery. Install the battery
in the Battery Compartment.
insert the Battery Cover back into place.
OF THE TOOL
damaged beyond
recycling facility.
8381493
pull to the handle of the
torque is reached, this will be
at lower
away" at the point
away" at the
prior to
hand direction and +/-6%
On
is +/- two minor
maintenance functions
technician.
and needs replacing, the
in the LCD readout. A picture
when the Battery has a
cover in place.
it with a new 3V,
according to the polarity
repair, do not throw it out.