Care & Maintenance; How To Clean; Resetting The Motor Thermostat - Ninja BL450 Manuel Du Propriétaire

Care & Maintenance

HOW TO CLEAN

CAUTION: Make sure that the motor base is
unplugged from the power source before
inserting or removing any attachment and before
cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
CAUTION: Handle the blade assemblies with care,
as the blades are very sharp.
1
Separate/remove all parts from each other.
2
Clean the motor base with a damp cloth and wipe dry.
3
Place the cups, lids and blades in the top rack of the
dishwasher.
4 Carefully hand wash the lids, Nutri Ninja
blade assembly in warm, soapy water with a soft cloth.
If the appliance needs servicing, please call customer
service at 1-877-646-5288.
OR
cups and
®
HOW TO STORE
1 Store the Nutri Ninja Pro upright. Secure the power
cord underneath the base by wrapping the cord around
the cord wrap. Do not place anything on top. Store the
cups and the rest of the attachments along side the
appliance where they will not be damaged and won't
cause a hazard.

RESETTING THE MOTOR THERMOSTAT

The Nutri Ninja Pro features a unique safety system
which prevents damage to the unit's motor and
drive system should you inadvertently overload your
appliance. If the appliance is being overloaded, the
motor will stop. To reset the appliance, follow the
resetting procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the cup and ensure that no food is
jamming the cutting blades.
3 Allow the appliance to cool for approximately 30
minutes.
4 Re-install the cup onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before while making
sure not to exceed the recommended maximum
capacities.
www.ninjakitchen.com 15