Setting The Systems In Conference Mode (Encryption Procedure); Important - Adeunis RF Vokkero Evolution 3 Notice D'emploi

«US tables» : can be used in North America (USA/Canada) and most of the Central and
South American countries.
«T0 tables» : can be used in Australia and some Asian countries.
«NZ tables» : can be used in New Zealand and some Asian countries.
TABLE ID
US1
US2
US3
US4
US5
T01
T02
T03
T04
NZ1
NZ2
NZ3
NZ4
Procedure :
On the home screen, press the "Menu" key until the User MENU is displayed.
•
• Using the "+" or "-" keys, access the Channel sub-menu. Press "OK" to validate your
choice.
• In the Channel menu, select the channel (US1 to US5 for USA/Canada version, T01 to
T04 for Australia version and NZ1 to NZ4 for New Zealand version ) by using "+" or "-".
You must assign the same channel number to all the terminals.
• Press "OK" to validate your choice.
• Press "Menu" to return to the home screen.
d. Setting the systems in conference mode (encryption procedure)
Principle: In order to communicate, the devices must save an encryption key supplied by
apparatus number 01.
This operation is required in order to:
• Enable all the devices to take part in a conference.
• Add a device to an existing system that has already been configured.

IMPORTANT

A device cannot communicate with a system if the encryption procedure has not been car-
ried out. If you want to add a terminal to an existing system, you absolutely must carry out
this procedure with all the devices in the system (including the devices configured in Listener
mode).
Make sure that each of the following criteria are fulfilled before starting the operation:
• All the devices must use the same channel.
• Only one device bears the ID 01.
Procedure:
On each device, press the "Menu" key until the User MENU is displayed.
•
• Using the "+" or "-" keys, access the Network sub-menu. Press "OK" to validate your
choice.
Vokkero Evolution 3
FREQUENCIES
25 channels within the 902MHz to 918MHz band
25 channels within the 912MHz to 928MHz band
25 channels within the 902MHz to 928MHz band
25 channels within the 902MHz to 928MHz band
25 channels within the 902MHz to 928MHz band
20 channels within the 915MHz to 928MHz band
20 channels within the 915MHz to 928MHz band
20 channels within the 915MHz to 928MHz band
25 channels within the 915MHz to 928MHz band
4 channels within the 921.5MHz to 924.5 MHz band
4 channels within the 924.5MHz to 927.75 MHz band
8 channels within the 921.5MHz to 928MHz band
10 channels within the 921.5MHz to 928MHz band
9