Fast Mode» Menu - Adeunis RF Vokkero Evolution 3 Notice D'emploi

c. «Fast Mode» Menu
« Fast Channel » quick settings
Principle:
When several Vokkero systems are used on the same site and use different channels, it is
possible to use the Fast Channel function to shift from one channel to the next. This func-
tion is useful because it offers a teams manager the opportunity to shift from one team to
another (each one uses one of the channels/tables available, without the communication link
established being audible to the others).
NB: If terminal 01 changes channels, the other boxes which remained on the previous chan-
nel will no longer be able to communicate. Therefore we strongly recommend that you NOT
assign role 01 to a terminal that has to change channels frequently.
• Procedure:
• Access the Options menu. Press "Ok".
Access the Fast mode. Press "OK" to validate your choice.
•
• In the Fast mode menu, select Fast Channel by using "+" or "-".
• Press "OK" to validate your choice.
• Press "Menu" to return to the home screen
Using the Fast Channel mode
The Fast Channel is used via the "+" or "-" keys on the keypad.
• Briefly pressing (for less than one second) the "+" or "-" key enables access to the chan-
nel selection.
• Select channel US1, US2, US3, US4 or US5 using the "+" or "-" keys and press "OK" to
validate your choice.
Note: To stop the Fast Channel mode, return to the dedicated sub-menu and select none
(cf. the "procedure" part above).
It is only possible to activate one Fast mode at a time. Therefore the Fast Channel mode
can only be activated at the same time as the Fast volume mode.
Adjusting the "Fast volume" setting
Principle:
In normal mode, the volume setting is accessed by unlocking the keypad and then pressing
either one of the "+" or "-" keys for 2 seconds.
The "Fast volume" function makes it possible to do away with these operations, thereby
enabling immediate access to the volume setting.
Procedure:
• Access the Options menu. Press "OK".
Access Fast mode. Press "OK" to validate your choice.
•
• In the Fast mode menu, select Fast Volume by using "+" or "-".
• Press "OK" to validate your choice.
• Press "Menu" to return to the home screen.
Note: To stop the Fast Volume mode, return to the dedicated sub-menu and select none (cf.
the "procedure" section above).
It is only possible to activate a single Fast mode at a time. Therefore, the Fast Volume
mode can only be activated at the same time as the Fast Channel mode.
Vokkero Evolution 3
12