Mains Adaptor; Optional Mains Adaptor; En Option Adapteur Secteur; Opcional - Adaptador De La Red - Wahl Lister Libretto Mode D'emploi Et Liste Des Pièces Détachées

Mains Adaptor

The Mains Adaptor provides continuous power from the mains supply
Safety information
• The Mains Adaptor is for indoor use only. Store and use in dry conditions
• Never immerse the Mains Adaptor unit or plug in water
• Never connect the clipper directly to the mains
• Ensure your electrical supply conforms to relevant standards
Clipping using the Mains Adaptor
• The Mains Adaptor uses interchangeable plugs for use in different countries. Ensure that the correct plug is
securely fitted before use
• Ensure that the clipper is turned off before connecting it to the Mains Adaptor
• Plug the Mains Adaptor into the mains outlet. Don't use trailing extension cables
• The LED light will illuminate when the Mains Adaptor is in use
• Oil the blades every 5-10 minutes
• Disconnect when not in use, and before removing or fitting blades (see Figure 2)
Overload protection
• The Mains Adaptor is fitted with an internal trip-switch to protect the Mains Adaptor and clipper from overloading. This
will trip if there is a problem, such as blunt or clogged blades, lack of oil, or excessive blade tension.
• If an overload occurs the LED will flash intermittently and the clipper will 'pulse' on and off. Switch off the clipper
immediately and unplug the Mains Adaptor. The problem must be rectified before resuming clipping. The unit will
reset automatically
• To prevent overloading, oil the clipper blades every 5-10 minutes, check for blunt or clogged blades, and do not over
tension the blades
Maintenance and storage
• Regularly check the cable and connectors for damage
• Store at room temperature in a clean dry place, out of the reach of children
• There are no serviceable parts inside the Mains Adaptor unit
Technical information
• AC Input
• DC Output
• Overload protection
• Operating Temperature
• Cable length
• Weight (excluding plug and cable)
100-240V~ / 50-60Hz / 1.8A
13.5V / 3.7A
4.8A
0-40 C
4m
0.25kg
5