Cleaning The Exhaust Air Filter; Troubleshooting - Otto XL-202 Mode D'emploi

cleaning the Exhaust Air Filter

2. Remove the exhaust air filter.
3. Tap out the exhaust air filter.
4. If necessary, also clean the exhaust air filter with clear, cold water.
5. Allow the exhaust air filter to dry completely before you insert it again.

troubleshooting

If the device should stop working properly, first check whether you are able to correct the
problem yourself. Otherwise, contact the customer service department.
Do not try to repair a faulty device yourself!
Problem
The device does not work.
Low suction force.
Dust escapes from the
device during cleaning.
01375_DE-GB-FR-NL_V1.indb 28
1. Remove the back cover of the housing by unscrewing the cover
in the anticlockwise direction.
Possible cause / solution
• Is the plug inserted in the mains socket correctly?
• Is the mains socket defective? Try another mains socket.
• Check the fuse of your mains connection.
• Is the device switched on? Press the On / Off switch.
• Is the dust container full? Empty it.
• Are the filters heavily clogged? Clean it.
• Is the suction opening blocked? Switch off the device and
remove the blockage.
• Is the object that you want to suck up too large / too
heavy? Remove it by hand.
• Check whether the dust container and the filters are
correctly inserted. Correct their position if necessary.
28
14.09.12 08:37