Device Cleaning And Storage; Emptying The Dust Container And Cleaning The Dust Filter And Motor Filter - Otto XL-202 Mode D'emploi

5. Hold the extension hose towards the accumulation of dust and dirt that you want to remove.
The dirt will be blown away.
6. Move the On / Off switch to the 0 position to switch off the device.

Device cleaning and Storage

cAutIOn!
❐ Make sure that the device is switched off before cleaning it.
❐ Never immerse the hand-held vacuum cleaner, the mains cable or the mains plug in water
or other liquids.
❐ Only insert the dust container, the exhaust air fi lter and the motor fi lter back into the device
when they are completely dry after being cleaned with clear water!
❐ Only ever use cold, clear water to clean the fi lters. Do not use any cleaning agents to prevent
damage to the fi lters.
❐ Do not use any corrosive or abrasive cleaning agents to clean the housing. They could
damage the surfaces. If necessary, clean the housing using a slightly damp, soft cloth.

Emptying the Dust container and cleaning the Dust Filter and Motor Filter

1. Hold the device fi rmly by the handle and keep it as horizontal as possible.
5. Empty the dust container into a rubbish bin.
6. Tap the dust fi lter out over the rubbish bin.
7. If necessary, clean the dust container and dust fi lter with clear, cold water.
8. Tap out the motor fi lter.
9. If necessary, also clean the motor fi lter with clear, cold water.
10. Let all parts dry completely before you put them back together.
01375_DE-GB-FR-NL_V1.indb 27
2. Press the release button and remove the dust container.
3. Remove the motor fi lter.
4. Remove the dust fi lter from the dust container.
27
14.09.12 08:37