Use As A Hand-Held Vacuum Cleaner; Use As A Blower - Otto XL-202 Mode D'emploi

❐ Never hold the nozzles, the suction tube or the suction hose close to parts of your body,
hair or animals during use. They could become stuck to the device. If the hand-held vacuum
cleaner does become stuck, press the On / Off switch immediately to switch off the device.
❐ Before you start vacuuming, remove any large objects on the floor which could block the
suction tube, the suction hose or the nozzles. Switch the device off immediately using the
On / Off switch if the suction tube or the nozzles become blocked.
❐ Remove and clean the dust container after each use (see the "Device Cleaning and Storage"
chapter).
❐ Switch on the vacuum cleaner only when you have checked that all the parts have been
completely attached, and that the dust container and the filters have been correctly inserted
and are completely dry (for details of how to insert the dust container and the filters, see
the "Device Cleaning and Storage" chapter).
The items supplied include a carrying strap to make it easier to handle the vacuum
cleaner during use!

use as a Hand-Held Vacuum cleaner

1. Attach one of the accessory parts to the hand-held vacuum cleaner if necessary (see the
"Attaching / Changing Accessories" chapter).
2. Connect the mains plug of the hand-held vacuum cleaner to a mains socket that has been
properly installed.
3. Hold the hand-held vacuum cleaner firmly by the handle. If necessary, use the carrying strap
supplied to carry it.
4. Move the On / Off switch to the 1 position to switch on the device. The device will start
vacuum cleaning.
5. Move the device over the surface which is to be cleaned or guide the previously selected
accessory part over the surface which is to be cleaned.
6. Move the On / Off switch to the 0 position to switch off the device.
7. Empty the dust container regularly and store the vacuum cleaner away after use (see the
"Device Cleaning and Storage" chapter).

use as a Blower

Please note that air will continue to be sucked in at the suction opening even when
you use the blower function! Make sure you do not accidentally suck up any objects!
1. Attach the blower attachment to the hand-held vacuum cleaner (see the "Attaching / Changing
Accessories" chapter).
2. Connect the mains plug of the hand-held vacuum cleaner to a mains socket that has been
properly installed.
3. Hold the hand-held vacuum cleaner firmly by the handle or use the carrying strap supplied
to carry it.
4. Move the On / Off switch to the 1 position to switch on the device. The device will start the
blowing process.
01375_DE-GB-FR-NL_V1.indb 26
26
14.09.12 08:37