PRO-POINT 8868176 Mode D'emploi page 5

VI .O
9. Never leave the soldering
10. Never file the specially
UNPACKING
WARNING! Do not operate
the missing part before
a malfunction
Remove the parts and accessories from the packaging and inspect for
damage. Make sure that all items in the contents are included.
Contents: • Soldering
• Adaptor, 24V, 1.5A
IDENTIFICATION
A Tip Point
B Tip
C Minus Button
OPERATION
CAUTION! The soldering
temperature exceeding 3500C over a long duration. Handle
temperatures
to cool frequently
Letter references in parenthesis (A) refer to the included Identification Key.
Tin the tip with solder before first use.
File off any dirt, rust or paint on the part you wish to solder.
2. Select the heat setting and wait for it to pre-heat. Wipe the tip point
(A) clean once it has heated.
3. Heat the part with the soldering
Visit www.princessauto.com
Soldering
plated tip.
operating.
and personal
Iron
KEY
iron's
℃
will reach 50 to 600C and can inflict a bum injury. Allow
or wear protective
for more
Iron with LCD
iron unattended.
the tool if any part is missing.
Failure
injury.
• Soldering
• Lead
CD
D
E
F
handle will retain heat when kept at a
℃
gloves if cooling
iron.
information
to do so could
iron stand
free solder wire
E
Plus Button
LCD
Adapter Port
is not possible.
8868176
Replace
result in
1.0 mm
5