PRO-POINT 8868176 Mode D'emploi page 3

VI .O
INTRODUCTION
The Soldering
including a standby and sleep setting. The time and temperature
settings are programmable.
SAFETY
WARNING! Read and understand
tool. The operator
risk of personal
Keep this manual for safety warnings,
inspection and maintenance
WORK AREA
1. Operate in a safe work environment.
well-lit and free of distractions.
in a shadow.
2. Keep anyone not wearing the appropriate
from the work
3. Store tools properly
the reach
PERSONAL
WARNING! Wear personal
Canadian Standards
Standards Institute
PERSONAL
1. Always wear impact safety goggles that provide front and side
protection
with CSA Z94.3-07
work performed.
Wear gloves that provide protection
2.
to reduce
3. Wear protective
and tool.
Visit www.princessauto.com
Soldering
Iron with LCD has a variable temperature
must follow
injury and/or
instructions.
area.
in a safe and dry location.
of children.
SAFETY
protective
Association
(ANSI).
PROTECTIVE
for the eyes. Eye protection
or ANSI Z87.1 standards
the effects of tool vibration.
clothing designed
for more
Iron with LCD
all instructions
basic precautions
damage to the equipment.
precautions,
Keep your work area clean,
Place lights so you are not working
equipment
(CSA)
EQUIPMENT
equipment
based on the work materials
for the work environment
information
control
before
to reduce
operating
safety equipment
Keep tools out of
approved
or American National
should comply
based on the type of
8868176
using this
the
or
away
by the
or
3