DeWalt DXCMWA5591056 Guide D'utilisation page 8

WARNING: RISK OF HOT SURFACES
WHAT CAN HAPPEN
• Touching exposed metal
such as the compressor
head, engine head, engine
exhaust or outlet tubes, can
result in serious burns.
HOW TO PREVENT IT
• Never touch any exposed
metal parts on compressor
during or immediately after
operation. Compressor
will remain hot for several
minutes after operation
• Do not reach around
protective shrouds or attempt
maintenance until unit has
been allowed to cool.
WARNING: RISK FROM MOVING PARTS
WHAT CAN HAPPEN
• The engine can start
accidentally if the flywheel is
turned by hand or moved by
pulling on the starter rope.
• Moving parts such as the
pulley, flywheel, and belt can
cause serious injury if they
come into contact with you
or your clothing.
• Attempting to operate
compressor with damaged
or missing parts or
attempting to repair
compressor with protective
shrouds removed can
expose you to moving parts
and can result in serious
injury.
8
HOW TO PREVENT IT
• Always disconnect the spark
plug and bleed pressure from
the air tank before performing
maintenance.
• Never operate the compressor
with guards or covers which
are damaged or removed.
• Keep your hair, clothing and
gloves away from moving
parts. Loose clothes, jewelry
or long hair can be caught in
moving parts.
• Air vents may cover moving
parts and should be avoided
as well.
• Any repairs required on this
product should be performed
by a D WALT factory
e
service center or a D WALT
e
authorized service center.