Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
String format
YD:STOP
YD:VOLUME [0..100]
YD:LINK <1..28>
<SOUND | LED> [1..28]
YD:EVENT <1..28>
<OFF | ON>
YD:INTERVAL <1..28>
[0..6000.0]
YD:MOB [TEST | ACTIVE] YD:MOB TEST
YD:HOLD [1..10]
YD:DURATION [OFF |
0..600]
Examples
YD:VOLUME 100
YD:LINK 1 SOUND 1
YD:LINK 2 LED 2
YD:LINK 2 LED
YD:EVENT 3 OFF
YD:INTERVAL 1 0.5
YD:INTERVAL 3 60
MOB mode commands
YD: HOLD 2
YD:DURATION 10
— 19 —
Description
Stops
the
playback
indication.
Sets the sound volume in percent, 0 turns off
all sound signals.
Links specified sound or LED indication
sequence with the event. In the MOB mode,
only the event with number 1 is used. One
sound or sequence can be linked with multiply
events.
Enables or disables the event with specified
number. This setting is ignored in the MOB
mode.
Sets
the
interval
parameter) between sound playbacks for
specified event. One sound can be linked with
multiple events.
The type of MOB event. Note that messages
sent from the Device are not transmitted
externally via VHF or AIS. Both types are
displayed in the same way on chart plotters,
the difference is only in the text displayed.
Duration of pressing the button in seconds to
activate or deactivate the MOB signal.
Duration of the sound signal in seconds. 0
value or OFF sets perpetual playback.
Table 1 continued
and
external
LED
(in
seconds,
second
Publicité
Table des Matières
