Operation - Batavia MAXXPACK BT-CLC002 Mode D'emploi

63630-Charger-Ma-1905-14.indb 7
• Do not expose the charger to water.
• Do not open the charger.
• Do not probe the charger.
• The appliance/tool/battery must be placed in a well ventilated
area when charging.
• The charger is intended for indoor use only.

OPERATION

Operation of Lithium-Ion Batteries
Lithium-ion batteries share many characteristics with conventional
batteries. The major difference is that Lithium-ion batteries do not
have a "memory" and do not require to be completely discharged
periodically. It is recommended to charge Lithium-ion batteries
after each use so they will be fully charged when needed.
Lithium-ion batteries perform best and deliver peak output power
at room temperature. When operated in lower temperatures, the
battery output will be reduced.
Note: A fully charged battery will loose about 2% of its charge per
month during storage.
Before use
The battery must be charged before using it for the first time.
Removing the battery from the machine
• Push the battery release button (2) and pull the battery (1)
out of the machine.
WARNING: Do not try to remove the battery without pressing the
battery release button. The drill or battery could be damaged.
Inserting the battery into the machine
Ensure that the exterior of the battery is clean and dry before
connecting to the charger or machine.
• Insert the battery (1) into the machine, push the battery fur-
ther forward until it clicks into place.
.
English
7
16-05-19 12:4