Device Overview; Installation - Klarstein Midnight Sun Mode D'emploi

EN
38

DEVICE OVERVIEW

Front side
1 Front surface
2 Power cable
3 LED surround

INSTALLATION

Please note:
• The installation work must be carried out by a professional electrician.
• LED input lines must be wired with switches that can interrupt the current-
carrying lines without hindrance.
• Before mounting and wiring, disconnect all lines that are to be wired to the
LED input line from the mains.
• LED input lines must be earthed.
• Do not hang panels on heating lines or LED input lines.
• No adhesive devices may be used for the suspension or hanging of the beam.
• Remove the front protective film before use.
Back side
4 LED mains input
5 limit screw