Dell PowerEdge 2420 Guide D'installation page 16

Figure 1-6. Reversing the Top and Bottom Hinges
1
3
5
7
Locate the top bolt holes in the right side of the rack, and fasten
g
the hinge body to the right side of the rack with the Allen bolts.
Insert the spring between the top and bottom hinge-pin holes
h
in the bottom hinge body.
Slide the hinge pin into the hinge body.
i
Insert the retention clip through the hinge so that the retention clip
j
is below the spring.
14
Installation Guide
7
hinge pin
spring
hinge post
front of rack
2 top hinge body
4 retention clip
6 bottom hinge body
1
2
3
4
5
6