deville C07367 Notice D'installation Et D'emploi page 21

•
If servicing of the blower is necessary for any
reason whatsoever (Fig. 28) :
Disconnect the appliance (or switch off the
.
power).
Remove the 3 mounting screws (1) from
.
the fan support and the protective grille.
Remove the 2 screws and the 2 fan
.
washers (2).
Remove the grille by lifting it.
.
Pull the fan at a slant angle.
.
NOTE : For terminal strip connections, refer to Fig. 29
and Fig. 30.
21