Garant 86487 Manuel D'instructions
Les langues disponibles
Les langues disponibles
Instructions
Packing List
•
Aluminum shaft
•
Bolts
•
Instructions sheet
WARNING: To reduce the risk of injury, the user must read and understand the operator's
manual before using this product. Save these instructions for future reference.
Toll Free Helpline: 1 800 463-7040
Aluminum Shaft
Replacement
Steps for Replacing the Aluminum Shaft
Connect the Aluminum Shaft to the Gear
1.
Remove the old aluminum shaft by unscrewing the two bolts.
2.
Align the round hole on the new aluminum shaft with the side coupling hole on the gear
attachment. (Fig. 1)
3.
Push the aluminum shaft into into the gear attachment and secure it with the two bolts.
The bottom bolt must go into the round hole. The tube must not be squeezed and
deformed by the bolt.
86487
Bolts
Fig. 1
Installation hole
Side coupling hole
www.garant.com
Manuels Connexes pour Garant 86487
Sommaire des Matières pour Garant 86487
- Page 1 Push the aluminum shaft into into the gear attachment and secure it with the two bolts. The bottom bolt must go into the round hole. The tube must not be squeezed and deformed by the bolt. Instructions 86487 Packing List • Aluminum shaft •...
- Page 2 Pousser l’arbre de fixation dans l’accessoire et le fixer à l’aide de deux vis. La vis inférieure doit être introduite dans le trou rond. Le tube ne doit pas être écrasé ou déformé par la vis. Instructions 86487 Contenu de l’emballage •...