Télécharger Imprimer la page
Les langues disponibles

Les langues disponibles

Liens rapides

Instructions
Packing List
Hood
Self tapping screw (5)
Instructions sheet
WARNING: To reduce the risk of injury, the user must read and understand the operator's
manual before using this product. Save these instructions for future reference.
Toll Free Helpline: 1 800 463-7040
Hood Replacement
Instructions
Steps for Replacing the Hood
WARNING: Make sure all moving parts are stopped completely and the battery pack is
removed when replacing the safety guard.
WARNING: The hood is intended for prevent thrown objects including snow to hit the
operator. Replace it when any worn indicators occur.
1.
Stop the motor, remove the battery pack and wait for all moving parts to stop
86484
completely.
2.
Lay the snow shovel attachment on its side for hood service.
3.
Remove the five screws that are located on the attachment guard. (Fig. 1)
4.
Replace the worn hood with a new one.
5.
Tighten the screws that you removed before. Avoid over thightening the screw.
Overthigthening srew may strip plastic thread on.
Fig. 1
www.garant.com
loading

Sommaire des Matières pour Garant 86484

  • Page 1 Replace it when any worn indicators occur. Stop the motor, remove the battery pack and wait for all moving parts to stop Instructions 86484 completely. Lay the snow shovel attachment on its side for hood service. Remove the five screws that are located on the attachment guard. (Fig. 1) Packing List Replace the worn hood with a new one.
  • Page 2 Le remplacer en cas d’usure des indicateurs. Arrêter le moteur, retirer la batterie et attendre l’arrêt complet de toutes les pièces Instructions 86484 mobiles. Poser la pelle à neige sur le côté pour l’ e ntretien du capot.