LEGRAND Wattstopper PW Série Mode D'emploi page 4

For applications requiring neutral wiring, remove tab as shown to expose terminals for wiring.
The Multi-Way capability is available on all models. Sensors can easily be wired together for convenient control of a common load.
When wiring this way, only use 300 series sensors. Multi-Way in 300 series is not compatible with prior sensor models.
The following principles apply for Multi-Way:
• All units can see each other's push button events and respond accordingly.
• All units can see each other's PIR trigger event. The response will be determined by the Light Level setting and/or conditions of the
space of the detecting sensor.
• The time delay for all units is defined by the unit with the smallest time delay.
Line
Red
Black
Yellow
traveler
Neutral
Green
(optional)
Ground
Neutral
Typical Wiring
(PW-301 or PW-301-347 up to 4 sensors)
Line
Black Red
Blue
Yellow
Brown
Green
Neutral
(optional)
Ground
Neutral
Bi-level Wiring
(PW-302 or PW-302-347 up to 4 sensors)
OPTIONAL NEUTRAL WIRING
Yellow
Red
Breakaway
tab
Black Red
Yellow
Neutral
Green
(optional)
Ground
Black
Red
Blue
Brown
Green
Neutral
(optional)
Ground
8" flying leads for line,
load, ground and
multi-way connections
PW-302 shown.
The PW-301 does
not include these
two leads
Blue
Optional neutral terminals
behind breakaway tab
MULTI-WAY
Neutral
Line 1
Load
Black
Blue
Green
Ground
Neutral
Primary
Load
Secondary
Load
4
Brown
Black
Green
Line 2
Black
Red
Blue
Yellow
Brown
Green
Neutral
(optional)
Ground
Two-phase Wiring
Red Primary
Load
Brown
Secondary
Load
Neutral
(optional)