Télécharger Imprimer la page

Panasonic CS-RE9JKE-1 Mode D'emploi page 4

Masquer les pouces Voir aussi pour CS-RE9JKE-1:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
REMOTE CONTROL
Maximum distances: 8m
Press the remote control's button
1
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
2
TO SET TEMPERATURE
• For heat, cool and dry modes, the range of temperature
for selection is 16°C ~ 30°C.
• Operating the unit within the recommended temperature
could induce energy saving.
HEAT mode : 20°C ~ 24°C.
COOL mode : 26°C ~ 28°C.
DRY mode : 1°C ~ 2°C lower than room temperature.
3
TO SELECT OPERATION MODE
AUTO mode - For your convenience
• During operation mode selection the power indicator
blinks.
• Unit selects operation mode every 10 minutes according
to temperature setting and room temperature.
HEAT mode - To enjoy warm air
• In heat mode, it may take a while for the unit to warm up.
The POWER indicator blinks during preheating.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
4
4
TO SELECT FAN SPEED (5 OPTIONS)
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
TO ADJUST AIRFLOW DIRECTION
5
(5 OPTIONS)
AIR SWING
• Keeps the room ventilated.
(GREEN)
• In COOL/DRY mode, if AUTO is set, the louver swing up/
down automatically.
(ORANGE)
• In HEAT mode, if AUTO is set, the horizontal louver fix at
(GREEN)
predetermined position.
(RED)
TO SWITCH AMONG POWERFUL, QUIET AND
6
NORMAL OPERATION MODE
POWERFUL: TO ACHIEVE TEMPERATURE QUICKLY
• This setting enables the desired set temperature to be
reached quickly.
QUIET: TO ENJOY QUIET ENVIRONMENT
• This setting provides a quiet environment by reducing the
airflow noise.
• POWERFUL AND QUIET operations can not be activated
at the same time.
PRESS TO RESTORE THE REMOTE CONTROL'S
7
DEFAULT SETTING
8
NOT USED IN NORMAL OPERATIONS
1
3
4
5
Remote Control display
2
6
7
8

Publicité

loading

Ce manuel est également adapté pour:

Cu-re9jke-1Cs-re12jke-1Cu-re12jke-1Cs-re15jke-1Cu-re15jke-1