Troubleshooting; Installation - Zanussi ZSG25224 Notice D'utilisation

Troubleshooting

Warning! Refer to the Safety chapters.
Problem
The appliance does not op-
erate.
The appliance does not op-
erate.
The appliance does not op-
erate.
The appliance does not op-
erate.
The lamp does not operate.
There is sparking in the
cavity.
There is sparking in the
cavity.
The turntable set makes
scratching or grinding
noise.
The appliance stop to oper-
ate without a clear reason.
If you cannot find a solution to the problem
yourself, contact your dealer or the customer
service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Installation

Caution! Do not block the air vents. If you
do that, the appliance can overheat.
Caution! Do not connect the appliance to
adapters or extension leads. This can
cause overloading and risk of fire.
• The appliance is for built-in use only.
30
Possible cause
The appliance is deactivated.
The appliance is not plugged in.
The fuse in the fuse box is blown.
The door is not closed properly.
The lamp is defective.
There are metal dishes or dishes with
metal trim.
There are metal skewers or aluminium
foil that touches the interior walls.
There is an object or dirt below the
glass cooking tray.
There is a malfunction.
Activate the appliance.
Plug in the appliance.
Check the fuse. If the fuse blows
more than one time, contact a quali-
fied electrician.
Make sure that nothing blocks the
door.
The lamp has to be replace.
Remove the dish from the appliance.
Make sure that the skewers and foil
does not touch the interior walls.
Clean the area below the glass cook-
ing tray.
If this situation repeats call the cus-
tomer service center.
The necessary data for the customer service
center is on the rating plate on the appliance.
.........................................
.........................................
.........................................
• The fitted cabinet must not have a back wall
behind the appliance.
• Put the appliance far away from steam, hot air
and water splashes.
• If you transport the appliance in cold weather,
do not activate it immediately after the instal-
lation. Let is stand in the room temperature
and absorb the heat.
Remedy
www.zanussi.com