IARP AB 500 P Instructions D'emploi Et D'entretien page 11

SAFETY WARNINGS FOR THE APPLIANCES
USING R290 COOLING FLUID (PROPANE)
Propane is a natural gas that doesn't affect the environment
but is inflammable. It is therefore indispensable to check
that the cooling circuit tubing is not damaged before con-
necting the equipment to the mains.
For every 8gr. of cooling fluid, the installation location must have a
minimum volume of 1 cubic metre.
The amount of cooling fluid in the appliance is indicated on the technical
data plate in the tank.
Leakage of cooling fluid: avoid naked flames or over sources of ignition
at the seat of the leakage.
Be careful not to damage the cooling fluid circuit during positioning ,
installation or cleaning. Avoid flames or sparks inside the equipment.
Warning! Do not damage the cooling fluid circuit
Warning! Do not damage internal or external walls of the machine:
the cooling fluid circuit may damage. In case of damaged walls do not
start the machine and refer to a service centre.
Warning! In case of damaged cooling fluid circuit, do not start the
machine and refer to a service centre.
Warning! Keep clear of obstruction all ventilation openings in the
appliance enclosure or in the structure for building-in.
Warning! Do not use electrical appliances inside the food storage com-
partments of the appliance, unless they are of the type recommended
by the manufacturer.
Warning! Do not store explosive substences such as aerosol cans with
flammable propellant in this aplliance.
- ORIGINAL INSTRUCTIONS -
INFORMATION ABOUT USE
-11-