Basics; Faceplate; Adjust The Volume; Change The Display Information - Kenwood KDC-X701 Mode D'emploi

BASICS

Faceplate

Volume
knob
Detach
button
Auxiliary cable from
the rear of the unit.
Attach Detach
To
Turn on the power

Adjust the volume

Select a source

Change the display information

* For
: The power will automatically turn off after 20 minutes when in standby mode (Auto Power Off).
Display Lights up when Bluetooth
window connection is established. ( 17)
Flashes when the unit
USB 1 cable from
enters searching status.
the rear of the unit.
(For /
USB 2 cable from the rear of the unit.
How to reset
On the faceplate
Press .
• Press and hold to turn off the power. *
Turn the volume knob.
Press repeatedly.
Press DISP repeatedly. ( 33)
Remote control (RC-406)
(supplied for
)
controlled with an optionally purchased remote control.
How to replace the battery
On the remote control
Press and hold SRC to turn off the power.
( Pressing SRC does not turn on the power. )
Press
• Press and hold
volume to 15.
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Press SRC repeatedly.
( Not available )
/ )
Remote sensor (Do not expose to
bright sunlight.)
Pull out the insulation
sheet when using for the
first time.
/ : Can be remotely
: Remote control functions are not available.
or .
to continuously increase the
ENGLISH
3