Display Settings - Kenwood KDC-X701 Mode D'emploi

AUDIO SETTINGS
Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]
If you specify the distance from the center of the currently set listening position to every
speaker, the delay time will be automatically computed and set.
1 Determine the center of the currently set listening position as the reference point.
2 Measure the distances from the reference point to the speakers.
3 Calculate the differences between the distance of the furthest speaker (rear speaker) and
other speakers.
4 Set the [DISTANCE] calculated in step
5 Adjust [GAIN] for individual speakers.
Example: When [FRONT ALL] is selected as the listening position
3
for individual speakers.

DISPLAY SETTINGS

Set the dimmer
Press and hold DISP (DIMMER) to turn on or off the dimmer.
• If you have set [DIMMER TIME], it will be canceled once you press and
hold this button.
Other settings
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item ( 28), then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press .
27
ENGLISH