WOLFF KRL Box Basic Set Traduction Du Mode D'emploi Original page 35

Battery replacement
3. Carefully remove the battery compartment, replace the batteries, and reinsert
the battery compartment into its designated slot.
4. Place the lid on the KRL box using the pin provided and insert it into the designated notches.
5. Replace the three screws on the underside.
Please do not use force during any of these steps and make sure that the lid with the
black sealing ring is replaced correctly.
6. The next time you start a measurement, please check the "Reset battery" box to inform the
KRL box that the battery has been replaced.
35
EN