Teletask TDS13644 Manuel Technique page 444

As 'Audio zone' select from the dropdown menu the zone you have just created ('Kitchen' in our example).
Click 'OK'.
Of course, don't forget to transmit your NBT file to your central unit.
Important
Audio Zones who are not linked to a room will not be able to controllable from any of the TELETASK
interfaces.
It can take up to ten minutes after a transmit for the connection from the TELETASK installation to your audio devices
to become fully operational.
If you want to control your audio system from an AURUS-OLED (PLUS), do not forget to couple the 'PREVIOUS' and
'NEXT' buttons on the 'Audio page' of the AURUS-OLED (PLUS). Select button nr 5 by clicking it with the mouse pointer
and activate the 'Couple Horizontal' 'V' mark as on the screen capture below.
(see the chapter on AURUS-OLED
This 'couple horizontal'on button nr. 5 will activate the artist and track information feedback on your AURUS-OLED.
Info: Default setting on AUTUS-OLED is for audio systems which don't support feedback information. If not coupled,
buttons 5 and 6 will only show an arrow left/right and prev/next instead of artist and track information.
23/1/2018
TELETASK ne peut pas être tenu responsable des potentielles erreurs dans les fiches techniques et dans la documentation technique.
Des changements dans les caractéristiques des produits peuvent être effectués à tout moment, sans préavis. ©, TELETASK, GENT
(PLUS) for more information).
×
×
Page 443